Digatron BNT-IGBT

Battery tester for Modules of up to 150 volts

With the BNT-IGBT, you can test battery modules in the voltage range of up to 150 volts and 500 amps. Its unique modularity enables stand-alone operation or the aggregation of several devices into one – for simplified control. Thanks to regenerative technologies, the device is highly energy and cost efficient even at peak power. Specifically developed for tests on drive batteries, you can use this device to test components on the 48-volt on-board electrical system, batteries for small BEVs, traction batteries for industrial trucks and many more battery modules.

High-current from 500 amps

Allows dynamic high-current applications with several hundred amps to be implemented.

 

High energy efficiency

All power elements feature IGBT power amplifiers and bidirectional power units with full sine wave grid regeneration.

 

Scalable

The modular construction, including all winding material, allows the system to be easily expanded by the addition of more modules for higher current and power.

 

Precise test results

Thanks to cutting-edge, perfectly synchronized hardware and software, our equipment achieves precise measurement results.

 

Parallel connection of circuits

Several built-in power elements can be connected in parallel to increase the current accordingly. It is also possible to link several test stations.

Digatron BNT-IGBT, modularer Bordnetz-Tester f?r Antriebsbatterien bis 150 Volt

Technical data

  BNT-IGBT BNT-RE BNT-ME
Voltage range 0 V up to 150 V* 5 up to 60 V 0 up to 60 V*
Current per circuit 500 A 50 A 10 A up to 250 A
Paralleling of circuits Yes Yes Yes
Control accuracy U DC < ± 0,1 % fs < ± 0,05 % fs** < ± 0,1 % fs
Control accuracy I DC < ± 0,1 % fs < ± 0,1 % fs** < ± 0,1 % fs
Regenerative DC link Yes Yes No
Mains feedback Yes Yes No
  Datasheet Learn more Learn more
* other values on request
** preliminary data

Suitable for the following tests

 

Start-stop simulation

Typical load profiles

Energy recovery during the braking process

Capacity tests

 

Accessories

Only the right accessories can transform a single product into a perfectly synchronized installation. Our extensive portfolio of accessories offers everything you need for a complete solution.

Digatron battery connector cable for monobloc container formation

Temperature Chamber

Digatron battery connector cable for monobloc container formation

Digatron's software for controlling and managing tests and formations

Battery Manager

Digatron's software for controlling and managing tests and formations

Reduntande ?berwachungseinheit bei Pr?fungen an Batterien mit kritischen Spannungs- und Temperaturwerten

Safetybox

Specially developed safety unit for testing batteries with critical voltage and temperature limit values

Cable to connect your battery under test to the Digatron device

Battery cable

Cable to connect your battery under test to the Digatron device

Measurement module for use in harsh environments and measures the DUT temperature

DLT

For DUT-temperature measurements in harsh environments with 4, 8 or 16 channels

Data acquisition for single cell voltages and battery and tank voltages during the test cycle

DLS

Data logger to meassure additional voltages and temperatures

We will be happy to help you!

Technical Consulting & Sales

+49 241 168 09 800
ask@digatron.de