PowerNet Tester


PowerNet Tester (BNT)

The PowerNet Tester (BNT) is designed to test batteries, ultracaps and all other types of electrochemical power sources for 14 V and 48 V power net systems.

BNT Series have been developed for Start-Stop testing as well as current recuperation during braking with starter/generator-systems (SGS/ISG) and all typical load profiles.

Current range switching ensures high reliable and accurate data in lower current ranges when running Long-Term Airport tests.

Additional high-speed input channels for voltage and temperature, the CAN interface to communicate with a Battery Management System (BMS) and the RS232 interface for a temperature test chamber (WT) complete the PowerNet Tester. Moreover, digital inputs and outputs allow controlling external equipment or modifying a test regime controlled by BTS-600 PC software.

360° View: PowerNet Tester (BNT)


The BNT and BTS-600 PC software are designed to test vehicle system batteries for 14V and 48V power net systems. But they may also be used for testing all other types of electrochemical power sources just by setting the required current and voltage values.

General Data

General Data
Control Interface: MicroME
PC Software: BTS-600
External control: RS 232, CAN-Bus
Accuracy: 10-100%: ±0.5% Set Value <10%: ±0.05% Full Scale
Control rate: < 5 ms
Transition charge/discharge: < 10 ms, -90% to 90% Inom
Rise time: < 5 ms, 10% to 90% Inom
Input power supply: 3-phase, 50/60 Hz
Ambient temperature: 10°C - 40°C (50-104 °F)

Product Info

PDF Datasheet

PowerNet Tester (263 KB)


Product Inquiry

Print View

Print Page